In Mint Condition & ready to use!
Highlights
Bag-Ready System for Interviews
Dual-Channel True Diversity Receiver
Bodypack and Plug-On Transmitters
2 x Omnidirectional Lavalier Microphones
Control Transmitters via Receiver
10-Hour Battery Recharges in 1 Hour
OLED Daylight Display Screens
Encrypted 24-Bit / 48 kHz Transmission
Auto/Manual RF Adjustment up to 100mW
Limiter, Low-Cut Filter & HF Boost
Features
Leave the UHF band behind and break into pro-level 2.4 GHz operation with the sound bag-ready Deity Microphones Deity Connect Interview Kit, a dual-channel, true diversity wireless system offering a host of high-end features, bodypack and plug-on transmitters, and everything you need to produce broadcast-quality sound for your next interview or narrative shoot.
The Deity Connect Interview Kit empowers you with the advanced technology, rugged durability, and extensive customization requisite for dependable, high-grade results. Knowing that a strong and solid audio link is crucial for professional results, the Deity Connect was designed as a bidirectional transceiver system with adaptive frequency hopping, "Listen-Before-Talk" stream repair, and encrypted, uncompressed digital signal integrity.
The receiver sports four antennas—two internal dipole horizontal antennas, and two external elbow antennas—to allow versatile positioning and deliver uninterrupted signal reception. Through its OLED screen and straightforward buttons, the receiver provides comprehensive remote control of each transmitter; no more walking over to your subject to adjust transmitter settings! There are two gain-adjustable 3.5mm TRS outputs, which can be utilized in any of the three output modes—XLR mode sends a separate audio channel as a balanced signal to each output jack, DSLR mode mixes both audio channels to one output and turns the other jack into a headphone output, while Stereo mode routes a stereo feed from each transmitter to separate outputs.
In addition to having the same OLED screen and user-friendly menu navigation as the receiver, the transmitters grant thorough control of your signal quality via automatic or manual RF power adjustment, switchable analog limiters, low-cut filters, and high-frequency boosts; tame peaks, reduce rumble, enhance clarity, and more. The locking 3.5mm TRS input jack on each transmitter conforms to the Sennheiser-standard pin configuration and can be set to accept a mono mic signal or a stereo line-level source for camera hopping.
The transmitters and receiver boast 10 hours of operating time at 100mW (more time at lower mW settings) via internal lithium batteries, which recharge in about an hour via USB Type-C connections. If you want efficiency and versatility without sacrificing quality, make the Deity Connect Interview Kit your wireless audio solution.
Applications
ENG (Electronic News Gathering)
Interviews
Conferences
Trade shows
System Features
2.4 GHz ecosystem with proprietary advancements for strong audio linkup while coexisting with other devices in the same frequency band
Bidirectional transceiver system is constantly scanning and mapping out the 2.4 GHz band, coordinating and planning the next 70 frequency hops to avoid RF interference
"Listen-Before-Talk" mechanism detects RF interruption then adds missing audio and data into the stream without increasing system latency
Dual true diversity design—as found in commercial-grade Wi-Fi and high-end drones—ensures reliable signal delivery
Encrypted 24-bit / 48 kHz signal transmission
Easy pairing and configuration
Powered via internal lithium batteries for up to 10 hours at 100mW RF output power
Recharges via USB Type-C connections in about an hour
Up to 500 battery cycles
19 ms latency
DUO-RX Receiver
Dual true diversity antenna arrays for a quad-antenna setup
Removable SMA elbow antennas allow user upgrades to clover antennas, directional antennas, or antenna splitters
Screen, buttons, and antennas face up in a sound bag, while USB Type-C and audio outputs are on the bottom for easy cable management
Lightweight at just 8.7 ounces
Daylight-bright, high-resolution OLED screen shows real-time VU metering, transmitter battery level, and more on the home screen
Convenient remote control of every audio adjustment on each transmitter
Easy firmware updates
Two locking 3.5mm outputs with multiple output modes
1/4" and 3/8" mounting points
BP-TX Transmitter
Compact, durable brushed-aluminum housing
SMA antenna connector
1/4"-20 mounting point for the belt clip
Two multicolor LED alert lights
Daylight-bright, high-resolution OLED screen shows statuses of all major features and real-time VU metering on the home screen
Auto/manual RF power output adjustment from 10 to 100mW
Automatic RF power mode increases battery life by never using more power than the system needs
Latching mute switch
Guardrail limiter
75/150 Hz low-cut filters
7 to 20 kHz high-frequency boost in 1 dB steps
Assignable unique user ID
Screen and button lock
Sennheiser-standard locking 3.5mm TRS input for compatibility with popular lavalier microphones such as the Sanken COS-11D, DPA Core Series, Sennheiser ME 2-II, Deity W.Lav, and others
Accepts mic- or line-level signals
Selectable stereo line-level input mode
Transmits to one receiver
HD-TX Plug-On Transmitter
Transmits to a Deity Connect receiver or records to a microSD card (media card available separately)
Firmware V2.0 allows USB audio interface functionality and simultaneous transmission and recording when using the XLR input and 48V phantom power
2.4 GHz encrypted transmission with advanced frequency hopping and bidirectional linking
Selectable RF output power of 10 / 25 / 50 / 100mW, or automatic
Guardrail analog limiter
75/150 Hz low-cut filters
Adjustable high-frequency boost (7 to 20 kHz in +1 dB steps)
Records 24-bit / 48 kHz WAV files
Balanced 3-pin XLR input with 48V phantom power
Locking 3.5mm TRS mic/line input with 3V plug-in power
1.3" OLED display
Selectable screen and button lock (manual or automatic)
Up to 10 hours of battery life at 100mW RF power
Recharges via USB Type-C connection (charging cable included)
90-minute recharge time via USB QuickCharge 2.0 / 3.0
Approximately eight hours of recording time via an 8GB microSD card (available separately)
3.5mm headphone jack for real-time monitoring or listening to playback
Firmware updatable
Includes holster with belt clip
