X-Rite 882 Color Photographic Densitometer.
Excellent condition & clean , No loose power jack, No cracks, etc.
Self Calibrates fine and very smooth/quiet, Unlikely to find a better condition unit.
Comes from a very clean professional work environment that closed down.
This auction include the following:
X-Rite 882
X-Rite 882 CD Manual
X-Rite 882 Calibration Strip
X-Rite 882 Power Supply
X-Rite 882 Interface Cable.
Serial to USB Conversion Kit
The X-Rite 882 was designed to meet the quality control needs of the professional photofinisher processing E-6, as well as the other common processes. The 882 is very much like the X-Rite 881, except that the 881 has only Status M for transmission operation, and the 882 has Status A and M for transmission operation.Transmission Status A is used for checking Positive transparencies (i.e., E-6 films) and Status M for checking Negative transparencies (i.e., C41 negatives). The 881 Operation Manual explains all of the functions and operation of the 882. However, there are a few differences in operation and they are explained in this 882 addendum. The 882 has the additional capability of: Measuring E-6 (Kodak & Fuji), Q-Lab, AP44, and P-5 film strips Measuring 2 different types of Inter negatives The additional film strips are selected and measured in the same manner as the other film strips explained in the 881 Operation Manual. The procedure for selecting and measuring interne gative strips is explained in Section 1 of this addendum. Refer to Section 2 for definition on the additional film strips and inter negatives.
Full Support is available : http://www.xrite.com/documents/
X-Rite 882 CD Manual
X-Rite 882 Calibration Strip
X-Rite 882 Power Supply
X-Rite 882 Interface Cable.
Serial to USB Conversion Kit
The X-Rite 882 was designed to meet the quality control needs of the professional photofinisher processing E-6, as well as the other common processes. The 882 is very much like the X-Rite 881, except that the 881 has only Status M for transmission operation, and the 882 has Status A and M for transmission operation.Transmission Status A is used for checking Positive transparencies (i.e., E-6 films) and Status M for checking Negative transparencies (i.e., C41 negatives). The 881 Operation Manual explains all of the functions and operation of the 882. However, there are a few differences in operation and they are explained in this 882 addendum. The 882 has the additional capability of: Measuring E-6 (Kodak & Fuji), Q-Lab, AP44, and P-5 film strips Measuring 2 different types of Inter negatives The additional film strips are selected and measured in the same manner as the other film strips explained in the 881 Operation Manual. The procedure for selecting and measuring interne gative strips is explained in Section 1 of this addendum. Refer to Section 2 for definition on the additional film strips and inter negatives.
Full Support is available : http://www.xrite.com/documents/
