X-Rite Noritsu Photo 881 Automatic Photographic Control Strip Densitometer excellent condition.
An essential item for the Photographic and Graphics arts business.
Self Calibrates fine and very smooth/quiet, Unlikely to find a better condition unit. Excellent condition & clean , No loose power jack, No cracks, etc.
Bundle include :
X-Rite 881 Densitometer.
X-Rite 881 Calibration Strip.
X-Rite 881 Calibration Strip.
X-Rite 881 Data Cable.
X-Rite 881 CD Manual.
X-Rite 881 Power Supply 50/60Hz , 110-240V.
The X-Rite 881 is an automated instrument that will read film control strips, paper control strips, and printer balance strips. Simply insert strip into unit for motorized, automatic measurements.
The 881 automatically measures many types of control strips (ex., EP2, C41, RA-4, etc.), sorts the data for measured fields such as: HD, LD, & Stain; and then displays and simultaneously transmits the data to the mini lab printer.
X-Rite 881 CD Manual.
X-Rite 881 Power Supply 50/60Hz , 110-240V.
The X-Rite 881 is an automated instrument that will read film control strips, paper control strips, and printer balance strips. Simply insert strip into unit for motorized, automatic measurements.
The 881 automatically measures many types of control strips (ex., EP2, C41, RA-4, etc.), sorts the data for measured fields such as: HD, LD, & Stain; and then displays and simultaneously transmits the data to the mini lab printer.
The strip formats are broken down into three categories: Paper (EP2, RA-4, CP-21, AP-92, R-3, P-3, etc.). Film (C-41, KBM, CN-16, etc.). Printer Balance (White Ringed Bull’s-Eyes, Black Ringed Bull’s-Eyes, Cropped Bull’s-Eyes, etc.).Refer to Control Strip and Balance Print Format Guide for a complete listing of all the control strips supported by the instrument.
The 881 will output a Red, Green, and Blue density value for each field (ex., Stain, Dmax, Dmin, etc.) measured.
The only requirement is that the areas to be measured on the control strip are aligned to either the left side, right side, or center line of the strip, in a straight line format.
To accommodate the different size control strips, the 881 has an adjustable paper guide on each side of the control strip entrance.
Adjustment is made by simply sliding the paper guides to the settings displayed for the strip selected.
The 881 communicates using the standard RS232C interface.
The only requirement is that the areas to be measured on the control strip are aligned to either the left side, right side, or center line of the strip, in a straight line format.
To accommodate the different size control strips, the 881 has an adjustable paper guide on each side of the control strip entrance.
Adjustment is made by simply sliding the paper guides to the settings displayed for the strip selected.
The 881 communicates using the standard RS232C interface.
If it is desired to remotely control the 881 you must use the RCI (Remote Control Interface) communication protocol discussed in the 880 seriesRS232 Interface Manual (available from X-Rite, P/N 880-506). The RCI feature is patented by X-Rite.
